3D print post-processing course

Sand, prime and paint your resin 3D prints to a collectible finish

A resin print comes off the plate with support marks, layer lines and a surface that paint will not hide. This course teaches the part after the print: cleaning and curing, wet sanding, filler primer, airbrush and hand painting, sealing and assembly. Ninety-five video lessons in nine modules, built on the workflow behind 187 collectibles for brands and artists. Self-paced, or one-on-one with weekly calls.

95 video lessons in 9 modules, taught by a toy sculptor

Mochi the Astro Cat, a hand-painted resin collectible in a white space suit with a glowing visor and a green blaster
Sound familiar?

You're probably running into this

Your 3D prints look good… until you look closer.

  • The surface isn't as smooth as you expected
  • Layer lines are still visible no matter what you try
  • Paint looks patchy or off
  • Your figures look more "homemade" than collectible
  • You've watched tutorials, but nothing really clicks
  • Resin prints are messy and scary if you don't plan accordingly
The truth is

It's not your printer.

People focus too much on 3D printer resolution and specs. What actually makes the difference is everything that happens after.

Course preview

The part nobody teaches you

A look inside the post-processing workflow used on 187+ professional collectibles.

Course trailer: a resin bulldog head in gloved hands, half in grey primer, half painted
95 lessonsVideo lessons, yours for life
9 modulesFrom raw print to finished collectible
12 hours and countingOf lessons, with updates added
Online course, self-paced or one-on-one

Choose your learning path

Two ways to master 3D print post-processing.

One-on-one mentorship course: a resin astronaut dog figure holding a tennis ball Premium

One-on-one mentorship

$2,500

Limited to 10 seats

  • All 95+ video lessons
  • Lifetime access
  • Equipment recommendations
  • All future updates
  • 9 video calls (one per week)
  • Personalised feedback on your work
  • Direct email access throughout
  • Portfolio review and guidance
  • Equipment consultation
  • Production strategy discussions

Best for: Students who want personalised guidance and direct access

Apply for mentorship
What's included

Nine modules on sanding, priming and painting 3D prints

Module 01: Print Preparation & Optimisation
01

Print Preparation & Optimisation

File splitting, hollowing strategies, and support setup in ZBrush and your slicer. 8 lessons.

Module 02: Professional Cleaning Methods
02

Professional Cleaning Methods

Cleaning protocols, UV curing, support removal, and drainage hole filling. 14 lessons.

Module 03: Wet Sanding & Surface Preparation
03

Wet Sanding & Surface Preparation

Removing support marks, sanding techniques, and preparing surfaces for primer. 11 lessons.

Module 04: Airbrushes, Compressor & Linear Sander
04

Airbrushes, Compressor & Linear Sander

Equipment selection, setup, maintenance, and proper technique. 11 lessons.

Module 05: Primer Application
05

Primer Application

Filler primer, fine grit primer, colour theory, and paint brand comparison. 8 lessons.

Module 06: Colour Application & Basic Masking
06

Colour Application & Basic Masking

Base coat application, masking tape techniques, and colour planning. 10 lessons.

Module 07: Advanced Masking & Hand-Painting
07

Advanced Masking & Hand-Painting

Vinyl cutting, stencils, detail painting, and brush care. 12 lessons.

Module 08: Sealing & Assembly
08

Sealing & Assembly

Varnish application, assembly techniques, and adding details like laces and strings. 10 lessons.

Module 09: Production & Presentation
09

Production & Presentation

Weathering, magnets, custom packaging, resin casting basics, and production. 11 lessons.

A resin 3D printer on a studio bench, a respirator mask beside it
Equipment list

What you will need

  • Resin 3D printer (any brand)
  • Airbrush and compressor
  • Basic understanding of printing and slicing
  • Linear sander
  • Workspace with ventilation
  • Primers and paint
  • Safety equipment
  • Sanding supplies
Oasim Karmieh at a table of resin and vinyl collectibles from the studio
About your instructor

Oasim Karmieh

I've been working in 3D design for over 25 years, with the last decade focused on designer toys and collectibles. I've created prototypes and limited editions for major brands and artists.

Brands work with the studio directly: see how the Sneak Energy figure was made, or how a studio project runs.

25+ yearsProfessional 3D design and digital sculpting
187+ collectiblesFor major brands, artists and collectors worldwide
95+ lessonsComplete workflow from file prep to final assembly
Selected client work
  • Sneak Energy logo
  • Wells Fargo logo
  • Chicago Bulls logo
  • Blink-182 logo
  • Mister Cartoon logo
  • Tara McPherson logo
  • Quiccs logo
  • JC Rivera logo
  • Thrilla Krew logo
3D printing

3D print finishing, learned on real client work

This is the post-processing system I've refined over 25+ years, used on 187+ professional collectibles for clients like Wells Fargo, Sneak Chicago Bulls, Sneak Energy and Blink 182, and artists like Mr. Cartoon, Tara Mc.Pherson, JC Rivera and Quiccs.

“Every technique in this course comes directly from real client work and my own collectibles.”

A black resin collectible figure in a gas mask helmet and trainers, beside a boombox
Compare

Self-paced or mentorship?

Compare what's included in each option.

Self-pacedOne-on-one mentorship
Price$499$2,500
FormatLearn at your own paceWeekly sessions with Oasim
AccessLifetime video accessLifetime video + live coaching
FeedbackNotes on each lessonDirect personal feedback
Best forIndependent learnersDesigners wanting fast results
Enrol now Apply for mentorship
Student project: a finished resin figure of an angel in round glasses and a pale blue robe, holding a green mug
Student project

I would recommend this course and mentorship with my eyes closed.

Oasim is not only a highly skilled professional artist, but also an exceptional teacher. He breaks down every part of the workflow in a way that is easy to understand, yet incredibly detailed and practical.

Juan P.One-on-one mentorship
Apply for mentorship
FAQ

Frequently asked questions

Which resin printer do I need?

Any brand. The course works with the resin printer you already have. You need a basic understanding of printing and slicing.

Do I need an airbrush to paint 3D prints?

Yes. Painting in the course is done with an airbrush and compressor, and smoothing with a linear sander. Module 4 covers choosing, setting up and looking after all three.

Do I need to sand and prime 3D prints before painting?

Yes, for a collectible finish. Module 3 covers wet sanding and removing support marks, and module 5 covers filler primer and fine primer, so the paint goes onto a smooth surface.

How much time does this take?

The lessons run 12 hours and counting, as I keep adding updates. On top of that you practise on your own prints. Most students take one module a week, which comes to 3 to 5 hours a week with practice. Self-paced, you can go faster or slower.

Do I need specific equipment brands?

No. I recommend what I use, but also provide alternatives at different price points.

What if I get stuck on something?

Self-paced students can leave notes on each lesson which I check regularly. Mentorship students can email me directly and we'll troubleshoot on our weekly calls.

How long do I have access?

Lifetime access to all materials, including future updates.

When does it start?

Self-paced: Immediate access. Mentorship: Starts within a week of signing up.

Do you teach digital sculpting?

Not in this course, which covers everything after the print. My ZBrush courses, including two on preparing a sculpt for 3D printing, are at oasim.gumroad.com.

Start today

If you're tired of prints that almost look right

Not sure which format is right for you? Send me an email and I'll help you find the best fit for your goals and experience level.